Archive for the ‘wood’ Category

See it before you get it

I have had dozen of requests for custom work for all sorts of things.  Many of these request have been initiated, sight unseen, without any real knowledge of what the final project will be.  Granted some of the items are simple in nature, and others are not very big or expensive projects, but some of them can be.  It is an honor that people put that much faith in my work based on other items that they have seen, but not everyone is that brave.

So say you are looking for a custom piece of furniture made for your exact needs and are investing hundreds (or thousands) of dollars into a high quality piece of work made from exotic woods.  Wouldn’t you like to have an idea of  what you can expect the end product to look like, especially if the item is different than any of the other previous works done by the craftsman (hopefully that craftsman is me…).

I have a solution for you!   Working closely with you I can generate a scale 3D model of what you are looking for so that you can have a better idea of what you will be receiving.   I can even apply wood color for the specific woods that you are looking to use to give you an even more representative image of the end product.  Now this certainly isn’t exact because wood can vary from piece to piece, but at least is in the ball park.  An additional advantage of going through this step is that we can see if something just doesn’t look right, maybe parts are out of proportion with the rest of the piece, or something is too small to really make a difference.  We can make that adjustment before any piece of wood is cut and produce a better product in the end.

I also like to do this for my benefit because it helps me think through the joinery for the project and determine the length of parts, especially when working with mortise and tenon joinery, it is easy to forget to add the length of the tenons to the overall length of the piece that needs to be cut.

Here is an example of a custom table that I built, starting with the 3D model and ending with the complete table:

On this project the cross was too detailed to fully capture it in the 3D, so a more basic cross of the approximate size was used as a place holder.  Also, you can see how the wood grain generated on the front of the table doesn’t match the grain of the actual piece.

This works even for less complex projects like this 5 picture frame that I make.  See the before and after in mahogany:

So fear not!  If you would like to commission me to build you a custom piece I will work with you from start to finish to make sure you get exactly what you are looking for.

-Derek

http://handmadewoodgifts.com

http://www.etsy.com/shop/HandMadeWoodGifts

http://www.facebook.com/pages/HandmadeWoodGifts/202991473994

Advertisements

Checkmate – Step 2

Well is was super cold outside this weekend, so I didn’t get as much done as I was hoping for.  When my feet start to ache from the cold I tend not work as much.  The important part is that I was able to get to the next step on these mills.

As I mentioned in the previous posts, I made these from a few pieces of wood glued together.   I then cut the salt/pepper mill blanks about an inch longer then I need, and mount them to the lathe.  Once on the lathe I turn them until they are a round cylinder and mark out where the top and the bottom are as well as where I expect transitions in the shape to be.

Here are some pictures showing how the pieces look right now, next time they will be fully shaped:

-Derek

http://handmadewoodgifts.com

http://www.etsy.com/shop/HandMadeWoodGifts

http://www.facebook.com/pages/HandmadeWoodGifts/202991473994

Tax refund time

Well it is about that time of year.. everyone takes a break from their busy lives to take some time and reflect over the previous year.  In this time of reflection we check to make sure that we have paid all of our taxes to Uncle Sam… ahhh quality time.

Now hopefully if you have to write a check, it is a small one.  After all it is depressing to see how much we pay in taxes throughout the year, to have to cut a check at the end feels like smack in the face.

But on the other hand if you did receive a refund it is like bonus money.  Yea, I know it is really MY money that over paid to the government, but it is still nice to get an extra check… so BONUS!   So since many of you may have received your tax refund (or will soon) why not consider purchasing a custom item made specifically for you.  Maybe you need a large cutting board or salt and pepper mill set for the kitchen, a new foyer table made to your specific dimensions from exotic wood, a blanket chest to be a family heirloom, a high-end pen, or any other things that we offer.  Why not consider using some of this “free” money and spoil yourself!

Let me know if there is something that you are interested in and we can make your vision a reality!

-Derek

http://handmadewoodgifts.com

http://www.etsy.com/shop/HandMadeWoodGifts

http://www.facebook.com/pages/HandmadeWoodGifts/202991473994

Checkmate – First steps

So here is a custom project that I’m excited to start for 2 reasons.  It is a set of salt and pepper grinders in the shape of a king and queen chess piece, which is something that I have on my to-do list.  Now I can say that I haven’t ever made these exact things, but there is no reason that I can’t!   The second reason is that when these are complete they will be sent to the other side of the planet… which is a pretty cool.

I plan to make several posts showing you the main steps in the process of producing a custom item.   The basic design requirements of these are that they are to be about 10″ tall and 2.5″ around.  My default woods for a project like this would be a solid piece of maple and walnut for the light and dark chess piece contrast.  However, in this case, the buyer would like to paint them herself.   So I will make them out of a less attractive wood called poplar, because no one will see it in the end, anyways.

The best thing to do when starting out is to put something on paper.  I usually start with a hand sketch like the 2 that I have below:

 

These are just guild lines to work out the basic shape and style, these aren’t to a true scale.  Also, the end product doesn’t end up lopsided (I never did do great in art class).   If I am really concerned about scale, I will sketch out ideas on graph paper.  If it is a really complex design that involves alot of thought I will draw in out in CAD ( I have a few projects in mind that might require this level of detail).

Of course the rough sketch is just a guild line.  As I get to turning the actual pieces I will often improvise and deviate from the sketch because in real life isn’t always the same as on paper.  Maybe an area looks to fat and needs to be thinned out, or a bead or detail look out of place… then it is up to me to do what I think looks best.

Check back soon to see what happens next!!

-Derek

http://handmadewoodgifts.com

http://www.etsy.com/shop/HandMadeWoodGifts

http://www.facebook.com/pages/HandmadeWoodGifts/202991473994

Personal Cross

As promised last month, here is a look at the gift I made for my wife’s birthday.  This idea has been in my head for over 2 years, and although it isn’t that complex, I’m glad I was able to finish it.

Religion is an important part of our lives and I have made a few more simple crosses in the past.   This one is a little more fancy than a traditional straight cross.  Although you have probably seen a cross of this style before, this cross was 100% designed and drawn up by me on the computer and I had some templates CNC cut from the drawing.   I had plans to try to produce these crosses in a production fashion from plywood and paint them, but that idea fell through for more than one reason.  Now I plan on sticking with my focus of using solid hardwood, in this case Jatoba, to do all the talking… no paint allowed!

I decided to add some additional detail with some old-fashioned nails, I think the heads of the nails are just the right touch.  I gave this cross several coats of a hand rubbed 100% tung oil finish.

Nail head detail

Nail detail

Now my mother-in-law wants one… A great Christmas idea for next year!!  Or maybe even Easter.

I have 2 different style crosses in 2 different sizes ready to be made.   The other style is much more round where as this one is pointed.  This one is the large one, about 18″ tall, the smaller one are about 10″

Of course you can always order one for your self in just about any wood, just ask!

-Derek

http://handmadewoodgifts.com

http://www.etsy.com/shop/HandMadeWoodGifts

http://www.facebook.com/pages/HandmadeWoodGifts/202991473994

He is risen

 

Sad sad day for custom Etsy lovers…

For those that aren’t familiar with Etsy, it is a website that is dedicated for selling handmade a vintage items.  They also had a section called Alchemy, which was an area to request an item custom made for you.  Etsy decided to take it down and revamp it, with no scheduled timeline to bring it back.  Most of my sales on Etsy have been through this section, or from repeat customers.  Now it is gone (for who knows how long) leaving no way for people to seek out custom items.

A group of Etsians have broken out and are starting up a website dedicated to custom requests called Uniimi.com (U Name It, I Make It).  The website is still under development but they are moving fast on it.  So if you are in the need for a custom item, or gift idea, check them out!   Of course you can always email me if you need some custom woodworking done!

Also, I have a custom job coming up that has been something that I have wanted to make for myself, but now need to make for someone else.  I plan on making a series of post showing the process of going from design to final product.  So check back to see what it could be!

-Derek

http://handmadewoodgifts.com

http://www.etsy.com/shop/HandMadeWoodGifts

http://www.facebook.com/pages/HandmadeWoodGifts/202991473994

As the bowl turns…

One of the most relaxing wood working experiences for me is turning a bowl.  I don’t get to do them nearly as often as I would like to, but when I do there is something hypnotic about watching the shavings peel off the wood.  Every bowl is different and can contain some unique characteristics.  For instance this bowl here has some spalting (the dark lines that you see) and some bug holes, which both add some uniqueness to the bowl and give it some character.  Now, I knew when I turned it that it would have some of this, but you never know what the final look will be like until the bowl is finished.

Right now I can really only turn bowls up to about 8” in diameter.  That is because of the size of my lathe.  I currently have a small lathe right now and that is the one tool where the size of the tool affects the size of the projects that you can do and you don’t have much other options.  Huge bowls sound interesting and fun to make but I hear that bowls that are over the 16” range are typically too large and too expensive for most people, I plan to test that theory in the future.  If you want to start seeing me produce some bigger bowls, then contact me about buying some of my smaller bowls :)!!

Mahogany bowl with Cherry stripe

Maple burl bowl with bark vein

 

Wood bowls make great candy dishes, center pieces, salad bowls, general catch all’s (I have one on my desk holding paper clips), show pieces, haircut guides for your kids hair, and just about anything else you can use a bowl for.

I have a few bowls that were very green (fresh cut) that I rough turned last year so that they will dry out a bit faster, and a few others that need some repairing… hopefully I can get back to those in a few months.  I hope to make some matching pepper mill and bowl sets too.  But that is for another time.

-Derek

http://handmadewoodgifts.com

http://www.etsy.com/shop/HandMadeWoodGifts

http://www.facebook.com/pages/HandmadeWoodGifts/202991473994